Trusted Brake Repair
in San Antonio

Our skilled staff is here whether your brakes are squeaking, grinding,
or simply do not seem correct. To keep you and your car safe on the
road, we provide open service, rapid turnarounds, and competitive rates.

What Brake Services Do
We Offer?

From brief brake examinations to complete brake system rebuilds, we cover everything. We have it covered
if it has to do with halting your vehicle. We provide:

Brake pad and rotor replacement

Many times, that indicates you ought to change your rotors or brake pads. We replace premium components to guarantee smooth, silent braking—no more worry, no more noise.

Brake fluid flush and replacement

The efficiency of your brakes relies much on brake fluid. It absorbs moisture or becomes soiled with time, which causes a soft brake pedal. For improved performance and safety, we flush the old fluid and then refill it with new.

Brake caliper and drum brake repair

If your brakes feel off or your car drifts to one side, your brake calipers may be the problem. When calipers squeeze the brake pads to stop your car and when they leak or get stuck, your safety is compromised.

ABS and brake line service

Your car is signaling that it requires assistance. To ensure that your brakes are responsive in an emergency, we fix ABS sensors, modules, and cables.

brake-repair-cost
average-cost-brake
price-of-brake-service

25 Years Experience

Gear Shape
Gear Shape

How Much Does Brake Repair Cost in San Antonio?

Pad replacement usually costs $150 to $300 per axle for a brake job. Prices could reach $400 or beyond if you require new rotors or calipers. Let's go on.

Average cost for front and rear brake jobs

Front brake pads cost roughly $150–$250.

Usually $130–$230 for rear brake pads

Full service for pads and rotors can range from $400 to $700

Keep in mind that these expenditures typically cover both materials and labor.

What affects the price of brake service?

These factors can affect the pricing:

Type of vehicle bigger or luxury vehicles typically cost more.

OEM parts cost more than aftermarket ones.

Wear level: Worn calipers or rotors raise the bill.

Most San Antonio shops charge $80 to $120 per hour for labor.

Budget brakes vs premium options

More cheap and ideal for everyday driving, budget brakes could wear more quickly.

Premium brakes are more expensive but more durable and provide superior performance,ideal if you haul or travel long distances.

What to Know about needing a Brake
Fluid Change?

needing-a-brake-fluid-change

Although brake fluid might not sound like a major issue, it is what enables your vehicle to stop safely and gently. It can become wet or absorb moisture over time, which impairs your brakes. A fast fluid change maintains everything in order and keeps you secure on the highway.

How much does a brake fluid flush cost?

Normally costing between $70 and $120, a brake fluid flush varies by shop and vehicle, but it's a little price to pay for more effective braking and peace of mind.

When should I replace my brake fluid?

About every two years or 30,000 miles,whichever comes first,you should replace your brake fluid. A checkup is called for if your brakes feel weak or porous or if your ABS light turns on.

Brake fluid leak symptoms and fixes

Typical markers are:

  • Spongy brake pedal
  • Warning light for the brakes
  • Fluids underneath the vehicle
break-fluid-flush-cost
brake-fluid-cost

Is Your Car Telling You It Needs
New Brakes?

Although your car won't require help, it will notify you if your brakes are about to go out.
Early detection can prevent costly repairs.

brake-pads-rotors

Signs of worn brake pads and rotors

Worn-Out rotors and brake pads' signs include grinding or vibrations when you stop, which could be brought on by either. A softer brake pedal and longer stopping distances are additional signs. It's best to have them inspected before they get worn out completely.

why-your-brakes-might

Why your brakes might be squeaking

Usually indicating worn brake pads, squeaky brakes usually point to this. It may also be rust, filth, or poor quality materials. Either way, don't overlook it; a fast inspection can stop more serious issues.

Abs-brake

ABS or brake light is on

If your ABS or brake warning light is on on the dashboard, something is off. Low brake fluid, a faulty sensor, or anti lock system problem are all possible culprits. For your road safety, have it examined at once. Don't delay.

cost-velve-stem-repair

Common Brake Problems You Shouldn't Ignore

Let's discuss a few typical brake problems that you should never ignore.

Why your new brakes are squeaking

  • That is, at first, rather normal.
  • This is the reason why it occurs:
  • It takes a while to break in new pads.
  • Some materials naturally squeak, notably those made of metal.
  • No lubricant at the contact points

Symptoms of a bad brake booster

  • A faulty brake booster makes it harder to stop.
  • Watch out for these warning signals:
  • The brake pedal feels stiff.
  • Cars require more time to stop.
  • Under the dashboard, a sizzling sound.
  • Engine sputtering.
common-brake-problem

What It Means by Braking Light On?

Should the brake warning light appear when driving, it is your car's method of declaring, "Something's not right with the brakes." Low brake fluid or worn out brake pads could be something more serious or it could be as basic as the parking brake being somewhat engaged. Either way, pay attention. First line of defense on the road are your brakes.


brake-warning-light
Service Icon

ABS light vs brake warning light

ABS Light: This suggests a problem with your Anti Lock Braking System, vital for preventing your wheels from locking up under heavy stopping.Warning light : This points to a possible problem with the pads, fluid, or general system of your brakes.Your signal to have the brakes checked immediately is when both lights turn on.

what-causes-brake-light-come
Service Icon

What causes the brake light to come on?

Your brake light may come on for a variety of reasons, including: not a lot of brake fluid,worn out brake pads ,Parking brake is not completely disengaged,faulty brake light switch,failure in the system or ABS.Start by checking the brake fluid. If it's low, top it off; however, if the light keeps on, it's time for an expert to examine it.

fixing-brake-light-switch
Service Icon

Fixing the brake light switch

A bad brake light switch might cause the brake lights to stop working or, even worse, the dashboard light to remain illuminated.An easy fix is as follows:Find the switch close to the brake pedal.Disconnect the power connection.Replace the shattered switch after removing it.After reattaching it, make sure your brake lights are working.Any mechanic may easily knock it off if you're not sure, even if it's a quick and inexpensive fix.

genuine-deals
Service Icon

Finding Genuine Deals vs. Low-Quality Services

Be cautious when comparing tire prices to see if you can get a good deal. The true value is dependable service at a fair cost, not just the cheapest price.

How to Change Your Brake Pads
DIY or Curious?

Thinking about changing your own brake pads? It's simpler than you think! You may learn something new
about your car and save money with just a few basic instruments and some time.

How to replace brake pads step-by-step
how-to-change-brake-pads

Considering replacing your own brake pads? It's less difficult than you would imagine! With a few simple tools and some time, you may save money and discover anything fresh about your car.

  • Cracking lug nuts just before lifting the vehicle.
  • Rise the car; Secure it with jack stands using a jack.
  • Take out the wheel to get at the braking components.
  • Unbolt the caliper and suspend it utilizing a wire (don't let it dangle!).

Remove Old Pads:

  • Push back the piston with a C- Clamp.
  • The new ones should be inserted in the same manner as the old ones were removed.

Bolt Caliper Reinstall:

Lower the car, put the Wheel Back on, and then tighten the lug nuts.

How long does it take to change brakes?
how-to-change-brake-pads

First-timers should budget two to three hours. Once you know it, it might take 1 to 1.5 hours; professionals sometimes complete it in less than an hour.

Tools you’ll need for a brake job

  • Jack & Jack's stance
  • Socket set or lug wrench
  • C-clamp or braking device
  • flathead screwdriverBrake pads
  • brake cleaner
  • Wire hangers or bungee cords
  • Torque wrench (optional)
  • rags and gloves
Which Brake Parts Are Best for Your Car?
how-to-change-brake-pads

Selecting the right brake components guarantees your vehicle is safe and smooth on the road. Using reputable companies and appropriate components counts all the difference whether you're replacing pads or improving your system.

Best brake pad brands (Power Stop, Brembo & more)

The following are a few of the drivers' favorites:

  • Power Stop is ideal for trucks and everyday drivers. Excellent stop, minimal dust.
  • Brembo: Pads designed for superior performance in terms of precision and speed.
  • Bosch is inexpensive, robust, and silent.
  • Akebono premium ceramic pads for high-end vehicles.
  • Wagner: For regular use, it's silent and soft.

When to resurface vs replace rotors

A brief guide follows:Resurface rotors if they are a bit worn or have minor gouges.Additionally, replace
rotors that are excessively thin, damaged, or uneven.

Brake kits vs individual parts

Brake kits have hardware, rotors, and pads. For entire substitutions, they are simple, inexpensive, and excellent.

If you just need one part or want to customize, individual components are preferable.

Book Your Brake Inspection in San Antonio Today

Here in San Antonio, we provide quick and honest brake inspections and services to give you the assurance you need to drive.

Quick brake checks and free estimates

We've made things simple. Stop by for a prompt brake check, and we'll provide you a simple, no-commitment brake service estimate. Our qualified brake experts examine every component pads, rotors, fluids, etc.so we have answers rather than making assumptions.

How to schedule brake service near you

Just call, walk in, or click! We are a nearby company that is simple to contact and always ready to assist. Regardless of whether the issue is planned maintenance or an unforeseen brake problem, we can get you on the schedule as soon as possible.

Same-day appointments are offered.

No ! To ensure you don't have to wait, we provide same-day brake service appointments. Since safe brakes cannot wait, simply call us early, and we'll do everything we can to get you in today. Let's get this fixed right away!

Brake fluid leak and how to fix it

If your brake fluid is leaking, there are signs of trouble.

Look for:

  • Wet areas close to the wheels or beneath the vehicle
  • A brake pedal that is soft and spongy
  • Warning light for the dash brakes

Repairs made quickly:

  • Find the leak, master cylinder, calipers, hoses.
  • Replace any damaged components.
  • Refill the braking system after bleeding it.
book-your-repair
schedule-brake-service
brake-fluid-leak

25 Years Experience

Gear Shape
Gear Shape

FAQS

Is it safe to drive a car if there is a brake fluid leak?

How long does it take to change brakes?

../